Eaton Moeller® DILM150(RDC24) Contactor – Frequently Asked Questions

About this FAQ
This page answers common questions about Eaton Moeller® DILM150(RDC24) Contactor. Used to switch and protect industrial motors and other power loads. Inside, you’ll find quick, factual answers on ratings, compatibility, installation, standards, and typical use to help engineers and buyers make decisions faster. For values not covered here, please check the official datasheet or reach out to Shansen Enterprises.

[faq question=”What is the Eaton DILM150(RDC24) contactor used for?”]
It’s a heavy-duty motor contactor used to switch and protect industrial motors and other power loads — ideal for manufacturing lines, HVAC systems, pumps, conveyors, and automation equipment.
[/faq]

[faq question=”What are the main electrical ratings?”]
Rated power: 75 kW. Rated voltage: 380–400 V (three-phase). Coil voltage (DC): 24–27 V DC. Supports AC-1, AC-3 and AC-4 categories.
[/faq]

[faq question=”How many poles does this contactor have?”]
It is a 3-pole contactor.
[/faq]

[faq question=”How many poles does this contactor have?”]
It is a 3-pole contactor.
[/faq]

[faq question=”What type of coil does it use?”]
It has a DC coil rated for 24–27 V DC (RDC24 designator).
[/faq]

[faq question=”What kind of terminals does it have?”]
The contactor uses screw terminals for secure and reliable connections..
[/faq]

[faq question=”Is it suitable for IE3 motors?”]
Yes, the DILM150(RDC24) is suitable for IE3 high-efficiency motors.
[/faq]

[faq question=”Is it suitable for IE3 motors?”]
Yes, the DILM150(RDC24) is suitable for IE3 high-efficiency motors.
[/faq]

[faq question=”What is the mechanical life and switching frequency?”]
Mechanical life (DC operated) is up to 10 million operations, with a switching frequency of 3,600 operations/hour.
[/faq]

[faq question=”What protection does it offer?”]
Includes finger and back-of-hand proofing per EN 50274 and a built-in suppressor circuit for coil electronics.
[/faq]

[faq question=”What is the IP rating?”]
Rated IP00 — must be installed inside an appropriate enclosure.
[/faq]

[faq question=”Which certifications does it meet?”]
Certified for CE, CSA, VDE, UL and compliant with IEC/EN 60947-4-1.
[/faq]

[faq question=”How can I purchase it?”]
Contact Shansen Enterprises (Authorized Channel Partner). Call/WhatsApp: +91 94426 33195.
[/faq]